Road snow and ice removal vehicle

Snow removal vehicles are key equipment for ensuring smooth traffic and safe operation of roads in winter. They are designed to quickly clear snow and ice on key roads such as urban main roads, highways, bridges, and slopes, avoiding accidents such as vehicle slippage and rear end collisions, and ensuring smooth traffic flow.

The wide body and wide lying cab shown in the picture (four point suspension, automatic electric lifting, ECE R29 European regulatory certification) is comfortable, with a German MAN 258 horsepower 6.87-liter large displacement six cylinder engine, a HOWO 8-speed (maximum torque 950, with synchronizer, high and low gears, original flange power take-off), a German MAN 9-ton bridge (stable turning, good braking performance, strong load-bearing capacity) 6+4/250MM straight through double-layer beam, front and rear reinforced multi leaf spring 7/7+6

Speed ratio: 5.29

Tire: 10.00R20 steel wire tire

Airbag seats, center console door locks, original air conditioning, original side power take-off, electric glass, electric cab lift, car horn, sunshade, cruise control

The chassis extensively adopts international top-level components (WABCO clutch control system from Germany) Whole vehicle brake valve; VOSS brake joint from Germany; Cummins fuel filter from the United States; German Mannheim air filter; German Behr intercooler and water tank Greatly ensuring the reliability of the entire vehicle

The snow melting spreader is an important equipment for clearing road ice and snow in winter. It mainly uses snow melting agents (such as salt, calcium chloride, environmentally friendly snow melting agents, etc.) to lower the freezing point of ice and snow, accelerate melting, and prevent the road from freezing again. Its working principle can be disassembled from three core links: power drive, snow melting agent delivery, and sowing control. The auxiliary devices inside the material box are:

Some spreaders are equipped with vibrators or mixing devices at the bottom of the material box to prevent the snow melting agent from blocking the outlet due to moisture and clumping, ensuring that the material falls evenly.

Tilt design of material box: The bottom tilts towards the conveying port, using gravity to assist material flow.

Conveyor mechanism:

Spiral conveyor (commonly used): Spiral blades (similar to "winches") are installed at the bottom of the material box, and the material is pushed towards the spreading mechanism through the rotation of the blades. The conveying volume can be controlled by adjusting the screw speed.

Belt conveyor: suitable for large particle snow melting agents, it rotates the belt to transport materials and has strong stability.

Scraper conveyor: It moves animal materials through scraper chains and is suitable for melting agents with high humidity or easy clumping.

The working principle of this car is: "power drive → material conveying → centrifugal/mechanical throwing → precise parameter control". By evenly covering the snow melting agent on the surface of ice and snow, using its chemical properties to lower the freezing point (such as salt can lower the freezing point of water from 0 ℃ to around -21 ℃), it accelerates the melting of ice and snow, suppresses the formation of new ice, and finally cooperates with cleaning equipment to achieve road de icing and de icing. Its efficiency is much higher than manual seeding, and it is the core equipment for large-scale snow removal on urban main roads, highways, and other areas.

When encountering problems such as road icing in extremely cold weather, it is important to choose a suitable snow and ice removal equipment in a timely manner. Our group has developed and produced snow and ice removal trucks, road snow removal trucks, and road ice removal trucks for many years. We believe there is a suitable one for you.

Among special - purpose vehicle companies, the company has passed ISO9001 - 2008 quality management system certification, ISO14001 environmental management certification, OHSAS18001 occupational health and safety management system certification, 3C mandatory certification, automotive energy - saving and environmental - protection certification, new - energy vehicle certification, export product quality license certification, product quality certification, and EU CE certification, etc. It has obtained special production license qualifications such as A2, C2, C3 pressure vessels, truck - mounted cranes, vehicle - mounted cranes, fire trucks, and national equipment scientific research and production qualifications. The company has more than 200 independently innovative products that have obtained national patents.

The company offers over 6,000 varieties of vehicles, including sprinkler trucks, garbage trucks, sewage suction trucks, night - soil suction trucks, oil tank trucks, chemical trucks, wreckers, aerial work platforms, fire trucks, truck - mounted cranes, refrigerated trucks, van trucks, pressure vessels, road maintenance vehicles, flatbed transporters, bulk grain trucks, dry - mixed mortar trucks, beekeeper trucks, stage trucks, propaganda trucks, mobile vending trucks, heavy - duty truck - mounted cranes, concrete pump trucks, pharmaceutical transport vehicles, and food transport vehicles, etc. Its products are exported to more than 100 countries and regions in the Middle East, Africa, Southeast Asia, South America, etc. The company's output value has consistently ranked among the top in various provinces and cities across the country. Its exports cover more than 30 countries and regions such as North Korea, New South Wales, and Angola, and the market share of its leading products exceeds 20%.

Q1.You are a factory or trading Company?

Yes, we are the overseas sales department of the factory. And welcome to visit our factory.

Q2 . Could your company modify the standard product depending on my request? 

Yes. Our company is specialized in researching and designing various special-purpose vehicles and spare parts. We can provide

any product according to your demand.

Q3. Could your company totally customize products for me?

We can provide the customized-designing product meeting with any of your demands.

Q4. Could you provide the certification that we need?

We can provide various certifications associated with the truck.

Q5. How long could we receive our goods?

It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.

Send your message to this supplier