HOWO 4×2 hook lifing refuse truck

The following matters need to be noted when using the large hook arm compression garbage truck: • Before operation ◦ Personnel training 3: Operators must undergo professional training and assessment, and be familiar with the various functions, operating procedures and safety regulations of the vehicle. ◦ Vehicle inspection 3: Comprehensively inspect the vehicle, including tire pressure, braking system, hydraulic system, hook arm device, lights, instruments, etc., to ensure that the vehicle is in good condition. • During operation ◦ Safe driving 3: When starting the vehicle, ensure the safety of the surrounding environment. During driving, maintain a steady speed and movement, avoid sudden braking and sharp turns, strictly abide by traffic rules, control the speed, and slow down in crowded areas such as campuses. ◦ Correct loading 2: Strictly control the garbage loading amount, and overloading is not allowed. Pay attention to the weight distribution of the garbage to avoid eccentric loading. When loading, ensure that the hook arm is firmly connected to the garbage bin to prevent it from falling off during transportation. For objects with larger dimensions, force filling cannot be performed to avoid damage to the filling device and other components. ◦ Standard operation 1: All operating devices must be operated strictly in accordance with regulations. During the operation, pay attention to any abnormal sounds or smells. If any faults are found, they must be eliminated in time. It is strictly forbidden to operate with faults. When the special device is working, the cruise slip ring must be in the OFF position to prevent the hydraulic oil pump from being damaged by excessive speed 2. When opening and closing the hopper, confirm the surrounding conditions, pay attention to the alarm buzzer, and ensure that no one or objects are in the danger range 1. ◦ Prevent leakage 1: Ensure that the hopper is tightly closed to avoid residual garbage between the box and the hopper causing sewage leakage. • After operation 2 ◦ Vehicle cleaning: After unloading, clean the vehicle, remove the residual dirt in the garbage bin, the loading hopper and behind the push plate, and rinse the inside and outside of the garbage truck and the filter screen at the sewage tank port. ◦ Vehicle inspection: Check whether there is oil leakage in the hydraulic components, joints, joint surfaces, etc., whether there is water leakage on the joint surface between the garbage bin and the filler, and whether the operating devices are damaged. ◦ Parking specifications: Pull up the handbrake and turn off the engine when parking. Use anti-skid devices when parking on a slope to prevent the vehicle from sliding accidentally.